DongGuang KaiTuo Carton Machinery Co.,Ltd.

I.Main technical parameter：
Parameters Unit Size
Roller diameter Mm 468
Model Mm 2000
Max..size of feeding paper Mm 1450×2600
Max.printing Mm 1450×2400
Thickness of applied paperboard Mm 4-8
Total power Kw Single color 3.0 , double colors4.0 , three colors 5.5
Min.slotting space Mm 110×200
Work speed Pcs/min 50


II.Paper feed worktable
1.Three gear chain feeding; movable basic baffle fixed position.
2.Can choose worktable clutch, for convenience adjusting the paper feeding position.
III.Printing unit
NO Item Specification
1 Printing Plate (1) Outer diameter ￠468mm，（include plate￠ 480mm）(2) Steel pipe surface treated by grinding, chrome plated.
(3) Balance adjustment treated, make running steady.
2 Printing Pressure Roller (1)Model 480 outer diameter is ￠124mm.
(2)Steel pipe surface treated by grinding, chrome plated.
(3)Balance adjustment treated, make running steady.
(4)Printing press roller space dial manual adjustment, adjustable range: 0-12mm
3 Feed roller
(Upper and Under rollers) (1)Upper roller: outer diameter ￠85mm thick-walled steel pipe, equipped with 2 paper feed ring.
(2)Under roller: 480 outer diameter ￠124. thick-walled steel pipe, surface plated chrome.
(3) Paper feeding roller space dial manual adjustment, adjustable range: 0-12mm
4 Steel Material ANILOX Roller (1)480 outer diameter ￠152.5mm
(2)Steel pipe surface grinding, embossing, plated chrome.
(3)Balance adjustment treated, make running steady.
(4)Mesh quantity : 180, 200
(5)Auto up and down device. ( when paper feeding the anilox roller downward connect with the printing plate; when stop the feeding, the anilox roller upward separate with the printing plate)
(6)Anilox roller equipped with sprag clutch, for convenience ink distribution and cleaning.
5 Rubber Roller (1)480 outer diameter ￠152.5mm
(2)Steel surface enclose hard-wearing rubber, Balance adjustment treated.
(3)Rubber camber specially grinding, good ink transport.
6 phase adjusting device (1)Planet gear structure
(2)Printing phase adopt electric digital type 360o adjustment.(machine running or stop can adjustable)
(3)Manual adjusting transverse position, adjustable distance 7 mm
(4)Auto restoration system after clean printing plate
7 Water base ink cycle (1)Pneumatic Diaphragm Pump, supply ink steady, operation and maintain easily.
(2)Equipped with ink filter screen, filter impurity.
(3)Steel material zinc-plated ink fountain.
8 Printing phase fixed device (1)Air cylinder type brake structure
When machinery separate or adjusting phase, the brake device control the machine moving, keep the position of the gear fixed.
IV.Die-Cutting unit
item description
1. Die cutter roller (lower roller) (1) 480, external diameter ￠352.4 mm (exclude die cutter)
（2）cast iron, grinded, hard chrome plating
（3）Balance correction, enhanced smooth – running
（4）Spacing of screw hole used for die cutter fix up is 100mm ×80mm
（5）Die cutter 25.4mm high
（6）Thickness of wood form: 13mm
2. Rubber mat roller (upper roller) （1） External diameter ￠480mm
（2） Cast iron, grinded, hard chrome plating
（3） Balance correction, enhanced smooth – running
（4） Manual adjusting the distance of the cutting die.
(5) Rubber mat thickness 8mm(outer diameter 400mm ), width 250mm
(6) Mechanical type transverse 58mm moving device.
3 Phase adjusting device （1） Planetary gear structure
(2) Adopt electric digital display 360° adjustment (adjustment can be done while machine running and stop)

V.Transmission gear
Item Specification
Mina transmission gear Material: 45# steel, high frequency quenching, hardness: HRC 50-55o

VI.Other specification:
Bearing HARBIN All
Electric CHINT All
Pneumatic single direction Diaphragm Pump WUHAN FANGYUAN All
Slotting part cutter QINGDAO QIFENG All