DEscriptION
Use
The machine is specially improved for environmental testing.The tensile machine is equipped with a high and low temperature test box，which can test tensile, pressure, tearing, shearing, peeling strength, deconvolution strength, ring initial adhesion strength and other physical performance in different temperature environments. When using the room temperature test, the high temperature box can be removed to increase the use of space and convenience.
Software function
Test & Control System is designed for PC Electronic Universal Testing Machines, PC Hydraulic Universal Testing Machines and PC Compression testers; can conduct tensile, compression, bending, shearing, tearing and peeling test; use PC and interface board for data collection, preservation, processing and printing test result; can calculate max force, yield strength, average peeling force, max deformation, yield point, elastic modulus and other parameters; can conduct curve graphics processing, multi-sensor support, video and image interface, flexible data processing, MS-ACCESS database support, making more powerful function of system.
Standards compliant
GB10586-89，GB/T7750-1987，GB2423.1-89，GJB150.3-86
SPECIFICATION
| Capacity | 10N、20N、50N、100N、200N、500N、1KN、2KN、5KN、10KN（Optional dual capacity configuration） |
| Temperature range | 0，-20，-40，-60，-70℃～150℃ |
| Display | Computer display mode |
| Force Resolution | 1/500,000 |
| Force Accuracy | 0.3% |
| Stroke Resolution | 1/500,000 |
| Control Mode | All computer operation mode of tensile machine |
| Temperature control | PID automatic calculation, stable error |
| Display accuracy | 0.1℃ |
| Temperature accuracy | ±1℃ |
| Circulation System | Fan force circulation system |
| Heating System | SUS304 stainless steel heat radiation type of heater |
| Cooling System | Fan cooling type, high-efficiency compressor, environmental protection cooling medium |
| Protection Device | Leakage and overload protector, compressor over protector, humidifier temperature protection, temperature limit protection device |
| Chamber Material | SUS#304 stainless steel |
| Test Stroke | 1300mm（Stand-alone operation of the tensile machine after the test box is removed） |
| Test Width | 720mm（Stand-alone operation of the tensile machine after the test box is removed） |
| Chamber Dimension | 40×40×80cm(W×D×H) |
| Test Speed | 0.01～500mm/min set by computer, with up & down fast adjustment button of grips |
| Force Unit Switch | kgf，N，Ibf，g，ton，Mpa |
| Stop Mode | Overload stop, emergency stop button, specimen damage automatic stop, upper & lower limit set automatic stop, automatic reset function |
| Machine Dimension | 130×230×280cm(W×D×H) |
| Machine Drive | Servo motor drive, synchronous wheel and precision ball screw drive |
| Power | 400W |
| Machine Weight | about 420kg |
| Power Supply | 220V 50/60HZ 30A |
| Standard configuration | Clamp extension rod, heat sink, 1 set of fixture, computer software, USB computer connection |
| Optional | Personal computer |