Intelligent servo electric press equipment:
1. The pressure is 50kn to realize the set pressure press fitting, and the detection accuracy of the press fitting force is 0.5%
2. Equipment structure form: c-shape.
3. Equipment placement mode: floor type.
4. Realize the vertical direction, and the repeated positioning accuracy in the position mode is plus or minus 0.01 mm.
5. The worktable is equipped with a cross t slot and a locking device to facilitate the coaxiality adjustment of the upper mold handle mounting hole and the worktable mounting hole.
6. The speed of working stroke and non working stroke can be adjusted within the setting range.
7. The equipment is equipped with left and right shield nets and safety protection gratings (the width and length of the shield are subject to customer requirements)
8. It has press mounting data access function.
9. It has the function of displaying the pressing force and displacement curve. The minimum scale of the pressing force coordinate is 600n (or 60kg), and the minimum scale of the curve coordinate display local curve is set to 0.01mm.
10. Drive mode: Japan Yaskawa servo drive system.
11. The pressure, stroke and speed can be set, and the minimum pressure setting value is 1N (or 0.1kg).
12. Two speed control modes are added to the software: 1. Detect slow advance and fast advance; 2. Work advance, pressure maintaining and fast reverse;
13. Press fitting force display mode during press fitting: real-time value and * value.
14. Displacement accuracy: ± 0.01mm