Jinan Zhaoyang Machine Co.,Ltd

Rock cutting machine
Equipment parameters and accessories:
1. The three coordinate motion system of cutting head is composed of imported high-precision rack and pinion, linear square guide rail, AC servo system, etc. So that the performance of the equipment is reliable, the error is small, and the efficiency is high.
2. CAD design graphics, machine automatic cutting, all cutting data is completely controlled by the computer automatically.
3. Linear cutting accuracy ≤± 0.1 mm / m, special cutting accuracy ≤± 0.15 mm / m
The thickness of rock plate can be cut: 3-15mm, the maximum cutting speed: 100M / min;
Cutting accuracy: parallelism ≤± 0.15mm/m, diagonal ≤± 0.15mm/m.
4. Desktop size: 2700 * 1700mm, original size of cuttable rock plate: 2500 * 1600mm
5. Power supply / power:
Installation power requirements: 380V / 50Hz (three-phase four wire), special circumstances can be adjusted according to customer requirements
Actual power: 8kw
Compressed air: 0.6MPa (provided by the user)
6. Equipment performance:
Equipment frame: the equipment is aged and milled by large-scale finishing equipment to ensure that the frame and table are not deformed
★ cutter base: Japanese SMC proportional solenoid valve is adopted, the pressure is automatically adjusted according to the thickness of the rock plate, the cutter head rotates 360 degrees, the upper and lower buffers, and the lower cutter cuts (it can accurately cut any straight line and all kinds of special-shaped glass)
Felt: Sino foreign joint venture industrial felt (fiber and wool) has good flatness and anti-static
Positioning system; photoelectric positioning, automatic edge searching positioning system, automatic trimming of the specific position of the rock plate, cutting according to the actual size.
Oil supply mode: pneumatic automatic oil injection, synchronous with cutting
 
7. Mechanical part:
Gear rack: Japanese khk
Guideway: Taiwan Shangyin
Wheel / clamp: Boler, Germany
8. Electrical part:
Using PC computer to control, Microsoft Windows interface
Voltage: 380V / 50Hz, with voltage stabilizing device
Motor: Huichuan servo motor
Control system: Beijing Baolun CNC
Pneumatic components: Taiwan Yadeke