|
Linearity |
0.5% |
|
Repeatability |
0.2% |
|
Accuracy |
±1% of reading at rates>0.6 ft/s. ±0.5% with on-site calibration |
|
Response Time |
0-999 seconds, user-configurable |
|
Velocity |
±0.03 ~ ±105 ft/s (±0.01 ~ ±30 m/s), bi-directional |
|
Pipe Size |
(15 ~ 6,000mm) |
|
Rate Units |
Meter, Feet, Cubic Meter, Liter, Cubic Feet, USA Gallon, Imperial Gallon, Oil Barrel, USA Liquid Barrel, Imperial Liquid Barrel, Million USA Gallons. User configurable. |
|
Totaliser |
7-digit totals for net, positive and negative flow |
|
Liquid Types |
Virtually all liquids |
|
Security |
Setup lockout. Access code needed for unlocking |
|
Display |
4x16 English letters |
|
Communication Interface |
RS-232C, baud-rate: from 75 to 115,200 bps. Protocol made by the manufacturer. User protocols can be made on enquiry. |
|
Transducers |
Model M1 for standard, other 3 models for optional |
|
Transducer Cable |
Standard 2x30? (10m), optional 2x1,500? (500m) |
|
Power Supply |
3 AAA Ni-H built-in batteries. When fully charged it will last over 10 hours of operation. 90-230VAC for the charger |
|
Data Logger |
Built-in data logger can store over 2,000 lines of data |
|
Manual Totalizer |
7-digit press-key-to-go totalizer for calibration |
|
Housing Material |
ABS. Aluminum alloy protective case |
|
Case Size |
3.9"x2.6"x0.8" (100x66x20mm) |
|
Handset Weight |
1.2 lbs (514g) with batteries |
|
Transducer |
Standard S2 type |
Standard M2 type |
Standard L2 type |
Standard HS type |
Standard HM type |
|
Suitable pipe diameter |
DN15-DN100mm |
DN50-DN700mm |
DN300-DN6000mm |
DN20-DNDN100mm |
DN50-DN700mm |
|
Fluid temperature |
0°c-160°c |
0°c-160°c |
0°c-160°c |
0°c-160°c |
0°c-160°c |
|
Outer size |
45×30×30mm |
60×45×45 |
80×70×55 |
|
|
|
Weight |
75g |
250g |
528g |
|
|
Standard packing:
TDS-100H Host
Standard M2 Transducer
Signal Cable
Fastening Chains
Charger
Ruler
RS232 cable
Empty plastic bottle (for loading gel)
English Instruction Manual
Carrying Case
If you need other transducer, please contact us.