6m Automatic Cutting Machine Main Features
--- The main frame of the EPS cutting machine is welded from square tube, with firm structure, high strength,
no deformation and can be freely and easily dismantled and assembled;
--- Cut by hot wire with smooth and level cut mark;
--- The EPS cutting machine motor speed is controlled by frequency converter can be swifted between
0-4m/min, with features of convenientadjusting,stable operation,low noise and accurate cutting size;
--- Electrical control box and transmission device are installed on cutting shelf to move along with the machine,
which is convenient operation;
--- This EPS block cutting machine adopts horizontal, vertical and edge surface cutting wires to realize block 3D
cutting; Equipped with its own moving device, the edge surface cutting wire could be run together with the
horizontal and vertical cutting wires at the same time,and using clutch to make the moving device quick return;
---The EPS machine is equipped with 10KVA transformer of multiple tapping,large capacity and wide voltage
adjusting range,the EPS block cutting machine can run 30 hot wires at the same time;
--- Automatic control system on the edge surface cutting is optional.
6m EPS cutting machine technical data
|
Item |
Unit / Model |
SPQ600 |
SPQ800 |
|
Maximum cutting size |
mm |
6000*1250*1250 |
8000*1250*1250 |
|
Transformer capacity |
Kva |
10 |
10 |
|
Installed power |
KW |
17.8 |
17.8 |
|
Outline Dimension |
mm |
8800*1900*2400 |
10800*1900*2480 |
|
Total Weight |
kg |
2800 |
3200 |