| Optimal saw optimization mode | |
| Fixed Length: 1) Saw according to list size | |
| Fixed length + drawing line: 1) After sawing and drawing line + single fixed length size; 2) In order to save wood, you can choose to combine the fixed length wood less than 150mm, which is suitable for finger joint panel use. | |
| Defect sawing: only sawing where the wood is drawn | |
| Model | SH-S200 |
| Working width | 20-200mm |
| Working thickness | 12-80mm |
| Max.cuting size | 120x80mm |
| Length of feeding work table | 3000mm |
| Nomber of feeding work table | 3000mm |
| Width of work table | 300mm |
| Min ingoing length | 400mm |
| Feeding table width | 80m/min |
| The number of feeding wheels of the main engine | 6 groups |
| Saw blade motor power | 455mm |
| Saw shaft speed | 3500r/min |
| Saw blade motor power | 5.5kw |
| Sawing up and down movement frequency | 2-4 times/1 second |
| Lift motor power | 3kw |
| Feed motor power | 3kw |
| Out feed motor power | 0.75kw |
| Pressing wheel lift motor power | 0.18kw |
| Total power | 12.43KW |
| Air Tolerance | 1000NL/min |
| Air Pressure | 0.6mpa |
| Diameter of dust extrance | Ф140mm/x3 |
| Exhaust speed | 30m/s |
| Weight | 1500KG |
| Dimensions | 7000x1200x1800mm |
Optimal saw optimization mode,SH-S200