| 10' Woodworking Table Saw Machine | |
| Model | SHC200 |
| N.W./G.W. | 180/200kg |
| Overall dimension | 1575*985*1200mm |
| Floor size of box | 514x498mm |
| Package size | 760*615*1050mm 925*365*160mm 1620*125*95mm |
| Electrical switch | Electromagnetic switch with thermal overload protection |
| Power supply | 1.85KW |
| Supply voltage | 230V |
| Power supply frequency | 50HZ |
| Power supply phase | 1PH |
| Supply current | 8A |
| Motor type | Totally enclosed air-cooled induction motor |
| Motor speed | 2900RPM |
| Motor drive mode | V-belt |
| Maximum blade diameter | 254mm |
| Dividing knife thickness | 2.5mm |
| Allowable thickness of saw blade body | 1.8-2.4mm |
| Allowable saw path width | 2.6-3.2mm |
| Maximum slotting width | 20.6mm |
| Saw blade angle | Tilt left 0-45 degrees |
| Spindle diameter | 15.875mm |
| Spindle speed | 3850RPM |
| Spindle bearing | Maintenance free sealed bearing |
| 90 ° maximum sawing depth | 79.4mm |
| 45 ° maximum sawing depth | 55.5mm |
| Maximum longitudinal cutting width on the right side of saw blade | 767mm |
| Maximum sawing width on the left side of the saw blade | 255mm |
| Platen height | 867mm |
| Main platen size | 512x685x40mm |
| Size of cast iron platen (including auxiliary platen) | 1016x685mm |
| Type of angle push chute | T-type |
| Size of angle push handle chute | 19.05x9.5mm |
| Surface treatment | Plastic spraying |
| Diameter of dust collector | 100mm |
10' Woodworking Table Saw Machine, SHC200