1. Description of JX-4080 Heavy Type Gantry CNC Plasma Flame Cutting Machine
It's gantry type structure, which is made by the main beam, secondary beam and lengthwise supports. The beams and supports are made of square steel. It's processed in machining center after welding and heat working, which ensures the beams and supports are of hardness and stiffness. We can install several lifting stations to the main beam so as to achieve several torches working together.
2. Technical Parameters of JX-4080 Heavy Type Gantry CNC Plasma Flame Cutting Machine
Model | JX-4080 | 1 set |
Lift Station | Plasma or Flame | 2pcs |
Track Width | 4000mm | Effective Cutting Width: 2200mm |
Track Length | 8000mm | Effective Cutting Length: 6000mm |
Cutting Dimater | 50-300mm | |
Controller Sysstem | Shanghai Fangling F2300BX | 1pc |
THC | HYD300 Brand THC | 1 pc |
Capacity Sensor | For Flame Torch | 1 pc |
Auto Ignition | For Flame Torch, Optional | 1 pc |
Operation Panel | Touch Screen Panel | 1pc |
Panasonic Servo motor | 400W | 4pcs |
Y Axis Rail | 24KG Harden Rail, 2m/pc | 14pcs |
X Axis Rail | Linear, Diameter: 30mm | 1pc |
Specification | ||
Machine Body | Gantry Width | 4000mm |
Rail Length | 8000mm | |
Effective Cutting Area | 2200*6000mm | |
Drive Motor | 400W Panasonic Servo motor*3pcs | |
Max Traveling Speed | 12000mm/min | |
Flame Torch | No. of Flame Cutting | 1pc |
Flame Cutting Thickness | 6-200mm | |
Flame Cutting Speed | 50-800mm/min | |
Flame Cutting Gas Pressure and Flow Request | Oxygen: 0.5-0.8Mpa | |
Purity: 99.5% | ||
Flow: 1.0M3/h | ||
Fuel Gas: Propane or Acetylene | ||
Pressure: 0.05-0.1Mpa | ||
Plasma Torch | No. of Plasma Cutting Torch | 1pc |
Plasma Torch Height Sensor | THC | |
Plasma Torch Anti-Collision Holder | SMART CUT | |
Model | Any Plasma Power Source | |
Duty Cycle | 100% | |
Plasma Cutting Gas Request |
Basically gas: dry and oil free compressed air Pressure and Flow as per Plasma Manuel |
|
Nest Software | FastCAM&Tube Master | 1 set |