Applications:
Used for measuring periodic motion, to check the imbalance and deflecting of moving machinery. Specifically designed for
present measuring various mechanical vibration. So as to provide the data for the quality control, run time and equipment upkeep.
Features:
* Can display the parameters of Displacement, Velocity and Acceleration simultaneously.
* In accordance with ISO 2954, used for periodic measurements, to detect out-of-balance, misalignment and other mechanical
faults in rotating machines.
* Specially designed for easy on site vibration measurement of all rotating machinery for quality control,commissioning, and
predictive maintenance purposes.
* Individual high quality ccelerometer for accurate and repeatable measurements.
* Wide frequency range (10Hz~10kHz) in acceleration mode.
* Optional headphones for use as electronic stethoscope.
* Bearing condition monitoring function.
* Use “USB data output” and “RS-232 data output” to connect with PC. (NOTES: RS232/ USB cable+software is optional part)
* Provide “Bluetooth ™ data output” choice. (NOTES: Bluetooth data output with software is optional part)
Details:
Sensor: Piezoelectric Transducer
Measuring Parameters & Range: Acceleration: 0.1~400 m/s2 0.3~1312 ft/s2 0.0~40 g Equivalent Peak
Velocity: 0.01~400 mm/s 0.004~16.0 inch/s True RMS
Displacement: 0.001~4.0 mm 0.04~160.0 mil Equivalent Peak-peak
Frequency: 5 Hz ~ 1k Hz
Frequency Range: Acceleration: 10 Hz ~ 10k Hz
Velocity: 10 Hz ~ 1k Hz
Displacement: 10 Hz ~ 1k Hz
Accuracy: 5 % of Reading + 2 digits
Metric / Imperial Conversion
Analogue Output: AC Output 0~2.0 V Peak Full Scale (Load Resistance: Above 10k)
Max. Value Hold
Power Off: Manual Power Off or Auto Power Off
Battery Indicator: Low Battery Indicator
Data Output: USB, RS-232, Bluetooth
Operating Conditions: Temperature: 0~50 °C Humidity: <90 %RH
Power Supply: 2 x 1.5V AA size (UM-3) Battery
Dimensions: 130 x 76 x 32 mm
Weight: 340 g (Not Including Batteries)
Standard Accessories:
1. Main Unit
2. Magnetic Suction Seat
3. Piezoelectric Transducer
4. Probe (Cone)
5. Probe (Spherical)
6. Carrying Case
7. Manual Book
Optional Accessories:
1. Headset
2. USB, RS-232 data cable with software
3. Bluetooth data out put with software
