2 Heads CNC Woodworking Furniture Engraving Cutting Machine with Vacuum Table
Application
Woodworking products, advertising signs, MDF board, cutting engraving Photo frame, sculpture the sofa and the head of a bed, All kinds of wood door carvings, Large furniture relief engraving, Dalle hollow out and simple copper aluminum plastic board, etc
Features
1.Strong welded steel T type structure as a whole with vibration Temper aging treatment ensures no deformation for long time.
2. Independent double Z-axis, each head can do same work or just one head working, much improving efficiency.
3. Vacuum adsorption table with 5.5kw air cooling vacuum pump, acuum table which is divided into 6 zones,also with aluminum alloy T slot, can adsorb different size materiel from small to big, , saving materials load-unloaded time.
4.Each spindle is 3.5KW air cooling spindle( China famous HQD brand) which is with stable performance, low noise and high torque, matched with high-performance frequency Inverter.
5. imported Hiwin, Taiwan Linear square guide rail with ball bearing slide block which ensure high weight capacity, high precision, smooth and steady running. Adpot imported precision ball screws, tools feeded with more accuracy.
6. Helical gears Pinion with Racks type transmission for X and Y axis, higher running speed and efficiency, saving cost. Z- axis with precision ball screw, high precision and more durable.
7. China famous Chuangwei brand 86BYGH450B steppermotor and Leadshine DMA860Hdriver for XYZ-axis, high precision, fast speed and more stable, dual motor Driven Y axis with traveling speed up to more than 25000mm/min.
8. DSP( RichAuto, A11E) offline control system with USB interface which is completely off from Computer. More Humanized design with Simple and Convenient Handle type operation.With pre-calculation rule, fully excavating potentialities of motors. Enable high processing speed, synchronization of Curve and straight line, more perfect curve working and Spindle startup and stop automatically.
9.Semi-auto lubrication system more convenient for maintenance.
10. Auto tools calibration, precision for Z-axis 0 point setting.
11. Dust collector 3.0kw double heads, help to suck dust, milling dust, keeps machine cleaning.
12. Favorable compatibility with various CAM softwares such as Type3/Artcam/Mastercam/Caxa. With intelligent over limit protection function which can stop the mechanical collision due to unproper size given to the design.
12. With the function of Break-point memory,power failure resuming and automatic home/origin correction function, effectively ensure long time working precision.
Technical Parameters
|
Effective working area |
1300(X)mm*2500(Y)mm*200(Z)mm |
|
Materials |
Strong T type steel pipe welded structure |
|
Working table |
Vacuum table with aluminum alloy T slot working table |
|
Moving type |
Gantry moving |
|
Guide rail |
Linear square guide rail ( Hiwin, Taiwan) |
|
Transmission |
Helical rack &pinion for X Y -axis, Lead ball screw for Z-axis |
|
Driving mode |
Stepper motor (86BYGH450B) and driver(DMA860H, Leadshine) for XYZ-axis |
| Z-axis | Double, independent |
|
Spindle motor |
3.5kw, HQD, China |
|
Spindle speed |
0-18000rpm |
|
Collets type |
ER25 |
|
Inverter |
Sunfar |
|
Voltage |
AC 220V±10%, 50/60Hz, single phase or AC 380V±10%, 50/60Hz, three phases |
|
Traveling speed |
>25000mm/min |
|
Engraving speed |
>12000mm/min |
|
Machine accuracy |
0.03mm |
|
Control system |
DSP A11E offline( RichAuto) |
|
Suitable software |
Artcam, Type3, Ucancam V9,etc |
|
Carving Instructions |
G code *Uoo *mmg *plt HPGL |
|
Running environment temperature |
0-45 ℃ |
|
Relative humidity |
30%-75% |
|
Lubrication system |
Semi-auto |
|
Tool calibration |
Auto |
| Dust collector | 3.0kw |
|
Certificate |
CE |
Reference Working Videos
For more information, just feel free to contact us!
Jinan Upgoal Mechanical Equipment Co.,Ltd
CNC Router/Laser Engraving Cutting Marking Welding Machine/Plasma Cutting Machine/
