The Features of WDS-620 bga rework station :
1.HD Optical alignment system for precisely mounting BGA and components
2.Touch screen and PLC controlling to ensure it work stably and reliably.
3.Components mounting accuracy within 0.01mm , Repair success rate 99.9%
4.Laser Positioning function for fast positioning the BGA Chip and motherboard
5.Precise temperature Control, accuracy within 2℃
6. Upper temperature zone can be moved freely, Second zone can be adjusted up and down.
7. Three temperature zones to heat up independently.
8. Hot air nozzle can be rotated in 360 degree
9.Perfect support Soldering, Desoldering, Removing and Reballing the BGA Chip
10. Rework BGA, VGA, CCGA, QFN, CSP, LGA, SMD, etc
11. With CE certification, double over temperature protection function
The Parameter of bga rework station :
| Place of Origin |
Guang dong , China |
| Brand Name | WDS |
|
Moed Number |
WDS-620 bga rework station |
| Superior function | Can create relevant temp,curves according to chips size |
Detail Specification
| Power | AC 220V±10% 50/60Hz |
|
Total Power
|
4800W |
|
Heater power
|
upper temp.zone 800w, second temp.zone 1200w, IR teom.zone 2700w |
| Temperature Controlling | K-type thermocouple close-loop control,independent temp.controller, the precision can reach ±1℃
|
|
PCB size
|
Max:370*380mm Min:10*10mm |
|
Applicable chips
|
Max: 80*80mm Min 1x1mm |
| Thermocouple Ports | 1 units |
WDS-620 BGA Rework Station Detailed SHOW
Independent 3 heating zones temperature control system
1.The upper and lower hot air heating,which can heat up at the same time from the top of the
component to the bottom of the PCB;bottom IR heating,temperature precision control within ±1℃.
8 segment temperature control independently. bga welding machine
2.Hot air district heating for BGA and PCB at the same time,and large area IR heater preheating up
for the bottom of PCB to avoid completely PCB deformation during reworking,the upper or lower
temperature zones could be used alone and combine freely the energy of up and lower
heating element. bga welding machine
3.Adopted high precision K-type thermocouple close-loop control and PID parameter self-setting
system; bga welding machine
4.temperature curves can be displayed with instant curve analysis function and multi-group
user data can be saved;temperature can be tested precisely through external measurement
interface,curves can be analysed,set and correct on the touch screen at any time.
